Do it yourself
Frequently asked questions about cars and motorcycles

What to Do When the Fan of the Alfa Romeo Giulietta Does Not Work

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

Video tutorial

Let's see what to do when the cabin fan of the Alfa Romeo Giulietta does not work: first, remove the panel from the passenger side. It comes off easily as it is only clipped in, so just pull it towards you. At the bottom of the footwell, you will find a red wire.

Follow it to a connector with two levers. Press them to pull out the connector.

Check that the contacts of both the connector and its socket are not oxidised; you might spray a bit of WD-40 to be sure. Perform a power test to see if the fan starts.

Often, this resolves the issue without further intervention. Refit the panel, and the problem is solved.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) This guide provides the main instructions on how to remove and replace the cabin fan in the Alfa Romeo Giulietta. First, get inside the cabin and loc…
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…
Alfa Romeo Giulietta (2010-2020 / MK 1) In modern diesel vehicles, such as the Alfa Romeo Giulietta, there are filters that block particulate matter contained in the exhaust gases, preventi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos