Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin fan motor in the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

Video tutorial

This guide provides the main instructions on how to remove and replace the cabin fan in the Alfa Romeo Giulietta. First, get inside the cabin and locate the cabin fan, situated low on the passenger side; then, unscrew the fixing screws and disconnect the electrical connector to remove it, as shown in the video.

At this point, you can remove the cabin fan and replace the fan resistor if necessary; replace either the entire cabin fan with a new one, reassembling everything!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) If you own an Alfa Romeo Giulietta and want to find the OBD port, follow the steps outlined in this guide. First, enter the cabin and ensure that the…
Alfa Romeo Giulietta (2010-2020 / MK 1) If you want to locate the OBD port on your Alfa Romeo Giulietta in order to use a diagnostic tool, then all you have to do is carefully read the foll…
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos