Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on an Alfa Romeo 156?

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Door trim panel

In this tutorial, see how to remove the rear door panel on an Alfa Romeo 156, a very simple and quick operation. First, go inside the cabin, then unclip the lower outer glass cover, the ashtray, and the small cap inside the opening handle. Next, unscrew all the screws just freed, remove the handle frame, and unclip the speaker cover. Finally, remove the speaker, extract the window switch panel, and separate the panel from the door by prying along the outer perimeter.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Door Panel on Alfa Romeo 156
Removing Rear Door Panel on Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial, you will see how to remove the door panel of the Alfa Romeo 156. The vehicle in question does not have electric windows at th…
How to Remove the Door Panel of an Alfa Romeo 156
How to Remove the Door Panel of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) How to remove the door panel of an Alfa Romeo 156? This guide explains the process. Before starting the disassembly, disconnect the battery terminals…
Removing the Door Panel of the Alfa Romeo 156
Removing the Door Panel of the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Today, we will go through the steps to remove and replace the front door panel of the Alfa Romeo 156. First, open the front door and begin unscrewing…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos