Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to remove the audio speakers of the Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Loudspeaker
Operation: How to remove the audio speakers of the Alfa Romeo 156

Removing the loudspeaker integrated in the front door panel of the car in question is extremely simple, as it is on all cars of this construction period: it is not necessary to remove the entire door panel but it is sufficient. unhook and remove the grille placed to protect the loudspeaker itself; at this point it is necessary to unscrew the fixing screws, extract the loudspeaker from its seat and disconnect the power plug. Before the 2000s the manufacturers did not pay much attention to the standard equipment of the car radio, so much so that it was an optional and in the same way there was a very well developed after market.


Posted on 4 September 2023 by ScegliAuto



How to replace the coolant reservoir on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure is only to be carried out with the engine off. Let's start by opening the front hood of our Alfa Romeo 156. After that, we will have t
How to replace the battery of the Alfa Romeo 156 key
Alfa Romeo 156 (1997-2007 / MK 1) If you own an Alfa Romeo 156 and want to find out how to replace the button cell battery inside the key, all you have to do is read the following gui
How to repair the turbine of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Do you want to give your car turbine a new lease of life but it seems complicated to you? Let's see in this video how to regenerate the turbine of an

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos