Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Speakers in the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Speaker

This brief and simple guide provides instructions for removing and replacing the front speakers in the Alfa Romeo Mito. First, open the front door and begin to remove the door panel; to do this, unscrew all the fixing screws found on it, disconnecting the electrical connector and the handle cable. At this point, use a drill bit to grind down and remove the speaker rivets; disconnect the power connector found at the back and replace the speaker with the new one, applying the reverse procedure!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Change the Gear Oil on an Alfa Romeo Mito
How to Change the Gear Oil on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, you will learn how to change the transmission oil on an Alfa Romeo Mito by following the instructions below. First, lift the vehicl…
Fuse Location on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) On the Alfa Romeo Mito, the first fuse box is located inside the cabin, specifically on the driver's side, low and to the left of the steering wheel …

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos