Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Removing the rear door panel Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Door panel
Operation: Removing the rear door panel Alfa Romeo 156

In this video tutorial we will see how to remove the door panel of the Alfa Romeo 156. The car in question does not mount the electric windows at the rear. First we open the rear door and remove the catch located in the handle for raising the glass with the help of a flat screwdriver. At this point we remove the glove box with a 4 Allen screw by unscrewing the internal screw: now we unscrew the screw of the handle and the screw behind the lid next to the handle; we remove the ashtray. We disassemble the lower case grille and remove the speaker. Once all the nuts have been removed, let's remove the door panel!


Posted on 10 December 2023 by ScegliAuto



How to remove the rear seats of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Before we can start, we will have to open the rear doors of our Alfa Romeo 156. Let's start by unscrewing and removing the lower bolts that secure th
How to remove the rear door panel in Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In this tutorial we can see how to remove the rear door panel in the Alfa Romeo 156, a very simple and fast operation. First of all let's go inside t
How to remove the door panel of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) How do you remove the door panel of an Alfa Romeo 156? This video explains how to proceed. Before starting the disassembly work, let's disconnect the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos