Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Box of the Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Glove compartment

Video tutorial

Below are the necessary steps to remove and replace the glove box of the Alfa Romeo 147, following the instructions provided. First, get inside the vehicle and start unscrewing the fixing screws located under the glove box using a socket spanner with an extension; then detach the two side rods of the glove box to remove it from the dashboard, as shown in the video.

At this point, install the new glove box (or repair the original) by applying the reverse procedure for reassembly!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
Removing the Cabin Fan on the Alfa Romeo 147
Removing the Cabin Fan on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) This guide outlines the main steps to remove and replace the cabin fan of the air conditioning system on the Alfa Romeo 147. First, access the interi…
How to Remove the Starter Motor from an Alfa Romeo 147
How to Remove the Starter Motor from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by removing all hoses and manifolds positioned above the starter motor by loosening th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos