Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to remove the starter motor of an Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Starter motor
Operation: How to remove the starter motor of an Alfa Romeo 147

Before starting, we will have to open the front hood of our Alfa Romeo 147. Let's start by disassembling and removing all the sleeves and manifolds positioned above the starter motor, unscrewing the relative fixing bolts. After that, we will have to unscrew and remove the bolts that secure the starter motor to its housing. By doing so, we will have freed the starter itself. We then proceed by disconnecting the relative electrical plug. At this point, we will have to extract the motor from the engine compartment, and we will have completed the disassembly.


Posted on 11 February 2024 by ScegliAuto



How to replace the starter motor on Alfa 147
Alfa Romeo 147 (2000-2010 / MK 1) Does the Alfa Romeo starter motor no longer work? We see the disassembly of the motor on a 147. We open and lift the front hood, remove the engine co
How to replace the Alfa Romeo 147 wiper motor?
Alfa Romeo 147 (2000-2010 / MK 1) To be able to replace the Alfa Romeo 147 wiper motor, you must first loosen the pins that secure the wiper arms and then remove the grille at the bas
How do you replace the windshield wiper motor of the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) The replacement of the windshield wiper motor of the Alfa Romeo 147 is done by opening the hood, so that access to the fastening screws of the plasti

    Frequently Asked Questions

    • 147 2000-2010 - How much does it cost to replace the starter motor in the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - Where is the starter motor located in the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - Where is the AlfaRomeo 147 1.9 JTD starter motor located Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos