Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the Alfa Romeo 147 wiper motor?

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Windscreen wipers
Operation: How to replace the Alfa Romeo 147 wiper motor?

To be able to replace the Alfa Romeo 147 wiper motor, you must first loosen the pins that secure the wiper arms and then remove the grille at the base of the windshield. Once the grille has been removed, it will be possible to unhook the connector connected to the motor and loosen the screws that secure the mechanism to the body. Once the screws have been loosened, the motor can be removed and replaced with a new spare part. After replacement, you will need to reinsert the grille at the base of the windshield and attach the brushes to the motor.


Posted on 8 March 2024 by ScegliAuto



How do you replace the windshield wiper motor of the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) The replacement of the windshield wiper motor of the Alfa Romeo 147 is done by opening the hood, so that access to the fastening screws of the plasti
Replacement of the Alfa Romeo 147 wiper motor and mechanism
Alfa Romeo 147 (2000-2010 / MK 1) Let's see in this guide the main steps that will allow us to disassemble and replace the mechanism and the wiper motor of the Alfa Romeo 147, but als
How to replace the wiper motor on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Our windshield wipers no longer work? Let's see how to proceed with the replacement of the same on Alfa Romeo 147: pull the plastic lever located at

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos