Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Replace the seat belts on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Dashboard
Operation: Replace the seat belts on Alfa Romeo 147

First of all, make sure you buy new belts that are approved by Alfa Romeo and that are of the correct model to be mounted on an Alfa 147. To remove the old belts, take a screwdriver and pry the plastic portion that is placed at the height of the seat belt attachment. Then take the Allen key and also remove the small bolt that blocks the belt gear. Press lightly forward so that it can be released definitively from its housing. It will then be possible to start installing the new seat belt. This will be equipped with a small gear at its end that will have to be positioned inside its housing, the one from which the old belt was extracted. Then tighten the bolt always using the Allen key and put the plastic back in its original position, simply fitting it.


Posted on 12 February 2024 by ScegliAuto



Removing the belts on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Removing the seat belts is not as complex as many believe. To remove the old belts, take a screwdriver and pry the plastic portion that is located at
How do you replace the headliner on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) In order to replace the roof carpet on the Alfa Romeo 147 you need to extract all the ceiling lights and disconnect them from their connectors. In ad
How to remove the inner pillars on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Today we will see how to remove the internal plastic pillars on the Alfa Romeo 147, following these simple and quick steps. First we get on board the

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos