Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Replacing the remote control battery on the Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Battery
Operation: Replacing the remote control battery on the Alfa Romeo 147

In this video tutorial we will see how to remove and replace the key remote control battery on the Alfa Romeo 147, but also on the 156 and 166. First we take our remote control and start by unscrewing the fixing screw that we find on the slot of the key; then we open our remote control, in order to access the battery, as shown in the video. At this point we remove and replace the battery with the new one, of the right type (in this case a 3V CR 2032); we just have to insert it in the correct direction and reassemble the battery holder, applying the reverse procedure!


Posted on 20 April 2024 by ScegliAuto



How to open the remote control shell of the Alfa Romeo 147 - GT
Alfa Romeo 147 (2000-2010 / MK 1) Let's find out in this video how to remove the remote control of the Alfa Romeo 147, but also of the GT, in order to access the battery and the elect
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m
Replacement of the clutch cylinder of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) In this guide, we will see the main steps that will allow us to disassemble and replace the slave cylinder or the clutch pump (of the pressure plate)

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos