Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Shell of the Remote Control for the Alfa Romeo 147 - GT

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Key

In this video, you will discover how to disassemble the remote control for the Alfa Romeo 147, as well as the GT, to access the battery and the electronic board. First, take the remote control in hand and start by unscrewing the screw located in the key slot, using a flat screwdriver; then separate the two halves of the remote control shell, removing the key and the electronic board from the casing, as shown in the video. At this point, transfer all components to the new key shell, placing them in the correct position and reassembling everything!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Remote Battery on the Alfa Romeo 147
Replacing the Remote Battery on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this tutorial video, you will learn how to disassemble and replace the battery in the key remote for the Alfa Romeo 147, as well as the 156 and 16…
How to Remove the Radio Antenna of an Alfa Romeo 147
How to Remove the Radio Antenna of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before you begin, sit in the back seat of your Alfa Romeo 147. Start by unclipping and removing the rear service light, then disconnect the associate…
Where to Find the Fuse Box in an Alfa Romeo 147
Where to Find the Fuse Box in an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the location of the fuse box in your Alfa Romeo 147, simply follow this mini guide. First, enter the car (driver's side) and reach…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos