|
Do it yourself
| |||
| ||||
How to Replace the Gear Knob on the Alfa Romeo Giulietta?
Model: Alfa Romeo Giulietta
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Video tutorial
In this tutorial, you will learn how to replace the gear knob on the Alfa Romeo Giulietta, a very simple and quick operation. First, go inside the cabin, then pry off the cover of the original knob by leveraging along the inner side slot. Next, unscrew the fixing bolt using a socket spanner, remove the base of the knob, insert the replacement, and reassemble everything by following the reverse procedure. Ensure that the reverse gear engagement spring is properly positioned and functioning correctly.
Updated on 20 August 2026 by ScegliAuto
Related tutorials
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
To replace the gear knob on an Alfa Romeo Giulietta, use a flathead screwdriver to lever and lift the old knob. Next, unscrew the bolt previously cov…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
To replace the gear knob on an Alfa Romeo Giulietta, lever out the groove that separates the lower part of the knob from the upper dome: the dome mus…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to Remove the Cabin Fan in the Nissan Qashqai?
The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |