Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on an Alfa Romeo Giulietta?

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Transmission

To replace the gear knob on an Alfa Romeo Giulietta, use a flathead screwdriver to lever and lift the old knob. Next, unscrew the bolt previously covered by the knob using a 10 mm spanner. This will also allow you to remove the lower part of the knob, taking care not to damage the spring. Once the old knob is completely removed, you can install the new piece. Screw it in, ensuring the spring is in place, and snap the end of the knob into position.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on an Alfa Romeo Giulietta
How to Replace the Gear Knob on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, you will learn how to remove and replace the gear knob on an Alfa Romeo Giulietta. First, get inside the car and with a flat …
How to replace the gear knob and boot of the Alfa Romeo Giulietta
How to replace the gear knob and boot of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In a few simple steps, we will see how to disassemble and replace the gear shift knob and boot of the Alfa Romeo Giulietta. First, get into the car a…
How to Replace the Gear Knob on an Alfa Romeo Giulietta?
How to Replace the Gear Knob on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) .. In this tutorial, you will learn how to replace the gear knob on an Alfa Romeo Giulietta, a very simple and quick operation. Start by.. …

    Frequently Asked Questions

    • Giulietta 2010-2020 - How much does it cost to replace the gear lever position sensor in the Alfa Romeo Giulietta? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos