Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Belt on the Alfa Romeo Mito 1.4

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

Video tutorial

Today's guide shows how to remove and replace the timing belt on the Alfa Romeo Mito 1.4; the manufacturer states that the timing belt should be replaced every 62,000 miles or 5 years. Therefore, raise the vehicle and begin by removing the front right wheel and the wheel arch liner; then disconnect and remove the serpentine belt, subsequently removing the crankshaft pulley, as shown in the video.

At this point, remove the timing cover to access the belt, taking the necessary references for replacement; install the original timing belt to ensure optimal durability.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt on an Alfa Romeo Mito
How and When to Replace the Timing Belt on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide outlines the main steps and instructions for changing the timing belt on an Alfa Romeo Mito. The timing belt on petrol engines typically n…
How to Replace the Timing Belt on the Alfa Romeo Mito 1.4 Turbo
How to Replace the Timing Belt on the Alfa Romeo Mito 1.4 Turbo
Alfa Romeo Mito (2008-2018 / MK 1) Discover in this guide how to remove and replace the timing belt on the Alfa Romeo Mito 1.4 turbo petrol, following the instructions below. First, op…
How do you replace the timing chain of the Alfa Romeo MiTo 1.3 MultiJet?
How do you replace the timing chain of the Alfa Romeo MiTo 1.3 MultiJet?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the timing chain of the Alfa Romeo MiTo 1.3 MultiJet, you will need to lift the car with a jack or a lift, so that the front right wheel i…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos