Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing chain of the Alfa Romeo MiTo 1.3 MultiJet?

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

Video tutorial

To replace the timing chain of the Alfa Romeo MiTo 1.3 MultiJet, you will need to lift the car with a jack or a lift, so that the front right wheel is not in contact with the ground: once it has been lifted, it will be possible to loosen the screws that fix it to the hub in order to remove it. At this point, you will need to remove the wheel arch trim panel in order to locate the chain: by unscrewing the screws that fix the tensioner, it will be possible to reduce its tension so that it can be removed and replaced with the new one.


Posted on 30 March 2025 by ScegliAuto


Related tutorials

Replace the water pump and timing belt on an Alfa Romeo Mito 1.3 MultiJet
Replace the water pump and timing belt on an Alfa Romeo Mito 1.3 MultiJet
Alfa Romeo Mito (2008-2018 / MK 1) In this video, we will see the instructions that will allow us to disassemble and replace the timing belt and water pump on an Alfa Romeo Mito 1.3 Mu…
How and When to Replace the Timing Belt on an Alfa Romeo Mito
How and When to Replace the Timing Belt on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide outlines the main steps and instructions for changing the timing belt on an Alfa Romeo Mito. The timing belt on petrol engines typically n…
Replacing the Timing Belt on the Alfa Romeo Mito 1.4 T-Jet
Replacing the Timing Belt on the Alfa Romeo Mito 1.4 T-Jet
Alfa Romeo Mito (2008-2018 / MK 1) In this guide, discover the instructions to remove and replace the timing belt on the Alfa Romeo Mito with a 1.4 T-Jet engine. First, open the bonnet…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos