Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Replace the water pump and timing belt on Alfa Romeo Mito 1.3 Multijet

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Timing belt
Operation: Replace the water pump and timing belt on Alfa Romeo Mito 1.3 Multijet

In this video we will see the instructions that will allow us to disassemble and replace the timing belt and the water pump on an Alfa Romeo Mito 1.3 Multijet. First of all we open the bonnet and start with the disassembly of the left engine support of the engine compartment; to do this it will be necessary to lift the engine from the underside of the car. At this point we remove the timing cover and the crankshaft pulley, removing the timing belt; we then remove the water pump, letting all the liquid drain. Follow the video to the end for complete reassembly!


Posted on 12 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Mito 2008-2018 - When to replace the timing belt in the Alfa Romeo MiTo? Read Answer
    • Mito 2008-2018 - After how many km is it necessary to replace the timing belt of an Alfa Romeo Mito? Read Answer
    • Mito 2008-2018 - How often does the Alfa Romeo Mito timing belt need to be replaced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos