Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump in the Alfa Romeo 147?

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Pump

In this tutorial, you will see how to replace the clutch pump in the Alfa Romeo 147, a very simple and quick operation. First, open the bonnet, then disconnect both battery terminals and remove the battery along with the intake manifold. Next, remove the battery tray, locate the pump in question, disconnect the upper hose, and separate it from the bracket by tapping it gently with a chisel and a hammer. Once done, position the replacement part and follow the reverse procedure to reassemble everything.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pump on an Alfa Romeo 147?
How to Replace the Clutch Pump on an Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) To replace the clutch pump on an Alfa Romeo 147, remove the panel located at the back of the pedal box, under the steering column. Once the panel is …
Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) This guide outlines the main steps to disassemble and replace the secondary cylinder or clutch pump (of the clutch diaphragm) of the Alfa Romeo 147 1…
How to Change the Fuel Pump of the Alfa Romeo 147
How to Change the Fuel Pump of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) This guide will show you how to remove and replace the fuel pump or the fuel sender of the Alfa Romeo 147, following the instructions below. First, r…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos