Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the clutch of the Alfa Romeo 147 1.9 JTD

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Clutch

In this guide we will see the main instructions that will allow us to disassemble and replace the clutch kit on the Alfa Romeo 147 1.9 JTD. First of all, we open the hood of the car and start by disassembling and removing the battery and battery holder, then disconnecting the clutch cable; we also remove the engine support, as shown in the video. At this point, we lift the car and remove the wheel, removing the front half shaft of the braking system; we remove the clutch cover and then replace the discs, also checking the condition of the flywheel, following the video tutorial until the end!

Posted on 9 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) This guide outlines the main steps to disassemble and replace the secondary cylinder or clutch pump (of the clutch diaphragm) of the Alfa Romeo 147 1…
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Alfa Romeo 147 (2000-2010 / MK 1) Today, we will go through the steps to replace the engine oil and oil filter on an Alfa Romeo 147 with a 1.9 JTD engine. First, open the bonnet of yo…
Replacing the Thermostat on a Fiat 1900 JTD Engine
Replacing the Thermostat on a Fiat 1900 JTD Engine
Alfa Romeo 147 (2000-2010 / MK 1) This video shows how to replace the thermostat for the radiator fluid. In this tutorial, we are working with an Alfa Romeo 147, but the most importan…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos