Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on an Alfa Romeo 147?

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Clutch

To replace the clutch pump on an Alfa Romeo 147, remove the panel located at the back of the pedal box, under the steering column. Once the panel is removed, you can access the components at the rear, including the clutch pump connected to the corresponding pedal. Once identified, disconnect the pipes and loosen the retaining bolts, removing the old pump to replace it with a new one. After replacement, remount the panel behind the pedals.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pump in the Alfa Romeo 147?
How to Replace the Clutch Pump in the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) In this tutorial, you will see how to replace the clutch pump in the Alfa Romeo 147, a very simple and quick operation. First, open the bonnet, then …
Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) This guide outlines the main steps to disassemble and replace the secondary cylinder or clutch pump (of the clutch diaphragm) of the Alfa Romeo 147 1…
How to Change the Fuel Pump of the Alfa Romeo 147
How to Change the Fuel Pump of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) This guide will show you how to remove and replace the fuel pump or the fuel sender of the Alfa Romeo 147, following the instructions below. First, r…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos