Do it yourself
Frequently asked questions about cars and motorcycles
The information provided in this guide will show us how to perform a complete service on the Aprilia SR 125 scooter. First, we put the central stand and start unscrewing the engine oil drain bolt, letting the fluid drain into a container for about ten minutes; then we unscrew the filler cap and top up the oil, pouring the right amount. At this point, we replace the air filter and check the wear of the brakes, replacing them with new ones if necessary, following the video tutorial until the end to complete the service!

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Sr 125 In this tutorial, you will see how to reset the service on the Aprilia SR 125 scooter, an extremely simple and quick operation to perform only after …
Sr 125 Follow this guide to perform the routine maintenance service by changing the engine oil and oil filter of the Aprilia SR 125 scooter. First, place th…
Sr 125 This guide shows you how to dismantle and replace the horn or acoustic warning device on the Aprilia SR 125 scooter, following the instructions below…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos