Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to reset the service on the Aprilia SR 125 scooter, an extremely simple and quick operation to perform only after completing all scheduled maintenance tasks. First, insert the key, then turn on the instrument panel and hold down both the "MODE" button and the "SET" button. Wait for about ten seconds, keeping the buttons pressed, then turn off the panel, turn it back on, and release the buttons once the interval has been reset correctly. To complete the procedure, simply restart the panel again.

Posted on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Aprilia SR 125 Scooter?
How to Change the Engine Oil on the Aprilia SR 125 Scooter?
Sr 125 In this tutorial, you will see how to change the engine oil on the Aprilia SR 125 scooter, a very simple and quick operation. First, ensure that the …
How to Replace the Front Headlight Bulbs on an Aprilia SR 125 Scooter?
How to Replace the Front Headlight Bulbs on an Aprilia SR 125 Scooter?
Sr 125 In this tutorial, see how to replace the front headlight bulbs on an Aprilia SR 125 scooter, a very simple and quick operation. Before proceeding, en…
How to replace the air filter on the Aprilia SR 125 scooter?
How to replace the air filter on the Aprilia SR 125 scooter?
Sr 125 In this tutorial, you can see how to replace the air filter on the Aprilia SR 125 scooter, a very simple and quick operation. First, wait for the eng…

Replacing the Fuel Pump on a Piaggio Vespa GTS 300

In this guide, you will find instructions on how to disassemble and replace the fuel pump on a Piaggio Vespa GTS 300. First, place the scooter on its stand and begin by removing the seat and the under-seat compartment; to remove the fuel pump, it is necessary to take off the petrol tank to disconnect the various connections to remove the fuel pump. At this point, install the new original fuel pump, then reassemble all previously removed components, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos