Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulbs on an Aprilia SR 125

Model: Aprilia Sr 125
Part: Light bulb

Video tutorial

Today's guide will show you the instructions to remove and replace the indicator bulbs on the Aprilia SR 125 scooter. First, place the scooter on its centre stand and start by removing the plastic cover of the instrument panel by unscrewing the fixing screws underneath; then disconnect the electrical connectors of the bulbs as shown in the video.

At this point, remove the indicator bulb and replace it with a new one of the correct type and with the same fitting; then reassemble everything!


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on an Aprilia SR 125 Scooter?
How to Replace the Front Headlight Bulbs on an Aprilia SR 125 Scooter?
Sr 125 In this tutorial, see how to replace the front headlight bulbs on an Aprilia SR 125 scooter, a very simple and quick operation. Before proceeding, en…
How to Service the Aprilia SR 125
How to Service the Aprilia SR 125
Sr 125 This guide will show you how to perform a complete service on the Aprilia SR 125 scooter. First, put it on the centre stand and start by loosening th…
How to Replace the Brake Pads on an Aprilia SR 125?
How to Replace the Brake Pads on an Aprilia SR 125?
Sr 125 To replace the brake pads on an Aprilia SR 125, perform the same operation for both the rear and front pads. In both cases, loosen the bolts that sec…

How to Replace the Exhaust on a Malaguti Spidermax GT 500?

To replace the exhaust on a Malaguti Spidermax GT 500, start by removing the old exhaust, loosening the connecting clamp, and unscrewing the bolts that secure it to its housing. This will allow you to remove the old exhaust and insert the new one, which must be connected to the exhaust system. Secure it by attaching the fixing clamp and connecting the exhaust to the support bracket at the top and bottom. Once the new exhaust is installed, you can start the bike and check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos