|
Do it yourself
| |||
| ||||
Model: Aprilia Sr 125
To replace the brake pads on an Aprilia SR 125, perform the same operation for both the rear and front pads. In both cases, loosen the bolts that secure the brake caliper to the respective disc so that it can be detached, allowing you to slide the pads out from inside the caliper. Once the old pads have been removed, insert the new ones, securing the caliper to the respective disc with the bolts; after installation, check that the brakes function correctly.
Updated on 24 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Sr 125
In today's tutorial, you will learn how to remove and replace the front brake pads on an Aprilia SR 125. First, unscrew the upper mounting bolts of t…
Sr 125
This brief guide will show you the procedure for removing and replacing the rear brake shoes on the Aprilia SR 125 scooter. First, place the scooter …
Sr 125
In this tutorial, you can see how to replace the air filter on the Aprilia SR 125 scooter, a very simple and quick operation. First, wait for the eng…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
