Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Aprilia SR 125

Model: Aprilia Sr 125
Part: Brake drums and shoes

Video tutorial

This brief guide will show you the procedure for removing and replacing the rear brake shoes on the Aprilia SR 125 scooter. First, place the scooter on its centre stand and begin by removing the exhaust by unscrewing the bracket bolt; then, remove the central wheel bolt by first taking off the split pin, as shown in the video.

At this point, remove the drum to access the rear brakes, disconnect the spring, and remove the old brake shoes; clean off any residual dirt and refit the new brake shoes!


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pads on an Aprilia SR 125?
How to Replace the Brake Pads on an Aprilia SR 125?
Sr 125 To replace the brake pads on an Aprilia SR 125, perform the same operation for both the rear and front pads. In both cases, loosen the bolts that sec…
Replacing Front Brake Pads on Aprilia SR 125
Replacing Front Brake Pads on Aprilia SR 125
Sr 125 In today's tutorial, you will learn how to remove and replace the front brake pads on an Aprilia SR 125. First, unscrew the upper mounting bolts of t…
How to Replace the Battery of the Aprilia SR 125?
How to Replace the Battery of the Aprilia SR 125?
Sr 125 To replace the battery of the Aprilia SR 125, lift the seat to access the components located within the under-seat compartment. Here, you will find a…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos