Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on the Aprilia SR 150 Scooter?

Model: Aprilia Sr 150
Part: Headlight bulb

Video tutorial

In this tutorial, you will learn how to replace the front headlamp bulbs on the Aprilia SR 150 scooter, a task that is extremely simple and quick. First, ensure that the key is not inserted, then remove all the indicated screws and separate the front fairing from the frame.

Next, disconnect the two power connectors for the lamps, remove the large rubber caps, and unclip the metal retaining clips. At this point, simply extract the old bulbs, insert the replacements, and reassemble everything by following the reverse procedure.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Aprilia SR 150
Replacing the Headlight Bulb of the Aprilia SR 150
Sr 150 Today, in this short and simple guide, learn how to remove and replace the dipped beam bulb of the front headlight of the Aprilia SR 150 scooter. Fir…
How to Replace the Headlamp Bulb on the Aprilia SR 150
How to Replace the Headlamp Bulb on the Aprilia SR 150
Sr 150 This guide outlines the steps to remove and replace the headlamp bulb with an LED type on the Aprilia SR 150 scooter. First, remove the front shield …
How to Replace the Rear Light Bulb on an Aprilia SR 150 Scooter
How to Replace the Rear Light Bulb on an Aprilia SR 150 Scooter
Sr 150 In this tutorial, you will see how to replace the rear light bulb on an Aprilia SR 150 scooter, a very simple and quick operation. First, ensure that…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos