Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb of the Aprilia SR 150

Model: Aprilia Sr 150
Part: Headlight bulb

Video tutorial

Today, in this short and simple guide, learn how to remove and replace the dipped beam bulb of the front headlight of the Aprilia SR 150 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws located behind the headlamp; then disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, remove the dipped beam bulb and replace it with a new one that has the same fitting; insert it in the correct orientation and reassemble the optical unit by following the reverse procedure!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlamp Bulb on the Aprilia SR 150
How to Replace the Headlamp Bulb on the Aprilia SR 150
Sr 150 This guide outlines the steps to remove and replace the headlamp bulb with an LED type on the Aprilia SR 150 scooter. First, remove the front shield …
Replacing the Rear Light Bulb on an Aprilia SR 150
Replacing the Rear Light Bulb on an Aprilia SR 150
Sr 150 In this video, you will see how to disassemble and replace the rear light bulb on an Aprilia SR 150 in simple steps. First, remove the screws from th…
How to Replace the Front Headlamp Bulbs on the Aprilia SR 150 Scooter?
How to Replace the Front Headlamp Bulbs on the Aprilia SR 150 Scooter?
Sr 150 In this tutorial, you will learn how to replace the front headlamp bulbs on the Aprilia SR 150 scooter, a task that is extremely simple and quick. Fi…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos