Do it yourself
Frequently asked questions about cars and motorcycles

Model: Aprilia Sr 50
Part:

In this guide we will see the instructions that will allow us to disassemble the flywheel and stator of the Aprilia SR 50 scooter, in simple steps. First, we put the scooter on the stand and start by removing the side cover, unscrewing the fixing screws; then we unscrew the central nut of the flywheel, using a puller to remove it, as shown in the video. At this point we disconnect the wiring of the stator, unscrewing the screws to remove it as well; we repair or replace it with a new one, then reassemble the flywheel and side cover!

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Sr 50 Today, we will see in this video tutorial how to remove and replace the clutch on the Aprilia SR 50 scooter by following these simple and quick steps…
Sr 50 Before you begin, sit on the seat of your Aprilia SR 50. Start by turning the key in the ignition switch to activate the instrument panel. Next, pres…
Sr 50 In order to replace the transmission of the Aprilia SR 50, you need to loosen the screws that fix the casing to its housing, near the rear wheel on t…

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos