Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Clutch from an Aprilia SR 50

Model: Aprilia Sr 50
Part: Clutch

Video tutorial

Today, we will see in this video tutorial how to remove and replace the clutch on the Aprilia SR 50 scooter by following these simple and quick steps. First, place the scooter on its centre stand and start by unscrewing the screws of the clutch cover located on the sides; then, unscrew the nut of the clutch bell to remove it later, as shown in the video.

At this point, replace the clutch discs with new ones that are suitable for your engine; then, simply reassemble everything by applying the reverse procedure of disassembly!


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Sr 50 To replace the belt on the Aprilia SR 50, first loosen all the screws securing the cover of the casing near the rear wheel. Once the casing is open, …
Sr 50 Here are the main steps to remove and replace the drive belt on the Aprilia SR 50 scooter. First, place your scooter on the central stand and start u…
Sr 50 In this video, you will see how to remove and replace the rollers in the variator on an Aprilia SR 50 scooter, following these simple steps. First, p…

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos