Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. :
  3. Sr 50
    4. : How to replace the variator rollers on Aprilia SR 50

Model: Aprilia Sr 50
How to replace the variator rollers on Aprilia SR 50

In this video we will see how to disassemble and replace the variator rollers on an Aprilia SR 50 scooter, following these simple steps. First of all, place the scooter on the central stand and remove the clutch cover, left side, by unscrewing the fixing screws on the sides; then we go to unscrew the central nut of the fan to remove it, as shown in the video. At this point we remove the variator, replacing the rollers that we find inside it; then insert the new ones, of the right type and with the same weight, and reassemble everything!


Posted on 7 February 2024 by ScegliAuto



How to replace the variator and rollers of the Aprilia SR 50R
Sr 50 In this video tutorial we will see the step by step instructions to disassemble and replace the variator and rollers of the Aprilia SR 50R scooter. F
How to replace the variator of the Aprilia SR 50
Sr 50 Let's see in this guide the steps that will allow us to disassemble and replace the variator of the Aprilia SR 50 scooter, following the instructions
How do you replace the belt on the Aprilia SR 50?
Sr 50 In order to replace the Aprilia SR 50 belt you must first loosen all the screws that secure the crankcase cover at the rear wheel. Once the casing ha

How to reset the oil warning light on a Yamaha T-max 500

The service light on a motorcycle is even more important than on a car. This is because if a four-wheeled car has problems and stops, it remains balanced on its four wheels. A two-wheeled vehicle instead falls to the ground, with the consequences that we can imagine. That said, to reset the service warning light on a Yamaha T-Max 500, you need to turn on the ignition and press the "reset" button located in the speedometer dial. The button must be held down for about 15/20 seconds, during which the light will start flashing. Upon release, the light will go out. Turn off the ignition and turn the bike back on. The light will be off.

Watch the video!


by ScegliAuto

More videos