Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Sr 50
Part:

This guide outlines the steps to remove and replace the variator on the Aprilia SR 50 scooter, following the instructions below. First, place the central stand and begin unscrewing the fixing screws located on the left side casing, on the transmission side, as shown in the video. Next, unscrew the fan nut to remove it, then take off the belt and the variator; now install the new variator and the rollers found inside, then reassemble the belt, the fan, and the side cover of the transmission!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the belt on the Aprilia SR 50?
How to replace the belt on the Aprilia SR 50?
Sr 50 To replace the belt on the Aprilia SR 50, first loosen all the screws securing the cover of the casing near the rear wheel. Once the casing is open, …
How to Replace the Rollers in the Variator on Aprilia SR 50
How to Replace the Rollers in the Variator on Aprilia SR 50
Sr 50 In this video, you will see how to remove and replace the rollers in the variator on an Aprilia SR 50 scooter, following these simple steps. First, p…
How to Replace the Variator and Rollers on an Aprilia SR 50R
How to Replace the Variator and Rollers on an Aprilia SR 50R
Sr 50 In this video tutorial, you will see step-by-step instructions for disassembling and replacing the variator and rollers on the Aprilia SR 50R scooter…

How to Dismantle the TM Racing KZ R1 Engine?

To dismantle the TM Racing KZ R1 engine, first remove the block from its housing by unscrewing the screws that secure it to the supports and disconnecting all hoses and connectors attached to it. Once the engine block is freed, unscrew the screws securing the cylinder at the top of the block. This will allow you to remove the piston from its conrod, and then you can unscrew the screws that hold the two half-cases of the engine. You can then remove and replace all internal components, reassembling all parts afterwards.

Watch the video!


by ScegliAuto

More videos