Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fairing of the Piaggio Vespa 125 Primavera?

Model: Piaggio Vespa 125 Primavera
Part:

Video tutorial

To remove the fairing of the Piaggio Vespa 125 Primavera, first loosen the screws that secure the footrest and the corresponding covering: once this is detached from its housing, you can loosen all the other screws that secure the additional panels positioned in front of and behind the footrest compartment.

All these coverings that make up the fairing can be removed from their housing, allowing you to insert new replacement parts: these can then be secured with the appropriate screws to their seats.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
Vespa 125 Primavera Good morning, today’s guide aims to replace the spark plug on your Piaggio Vespa Primavera 125. Start by removing the side panels of the scooter. Nex…
How do you replace the rearview mirror of the Piaggio Vespa 125 Primavera?
How do you replace the rearview mirror of the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera The replacement of the rearview mirror of the Piaggio Vespa 125 Primavera can be done by lifting the rubber covering located at the base of the mirro…
How do you replace the headlight bulb of the Piaggio Vespa 125 Primavera?
How do you replace the headlight bulb of the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To replace the headlight bulb of the Piaggio Vespa 125 Primavera, you need to loosen the two screws located under the headlight, so that it is possib…

How to Replace the Water Pump on the Malaguti Spidermax GT 500

To replace the water pump on the Malaguti Spidermax GT 500, loosen the screws securing the cover on the right side of the vehicle. Underneath, you will find the stator, which can be removed from its housing. Once the stator is extracted, locate the water pump underneath and remove it from its seat by loosening the securing bolts and disconnecting the hoses. At this point, insert the new water pump and check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos