Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?

Model: Piaggio Vespa 125 Primavera
Part: Spark plugs

Video tutorial

Good morning, today’s guide aims to replace the spark plug on your Piaggio Vespa Primavera 125. Start by removing the side panels of the scooter. Next, disconnect the cable that connects the spark plug to the coil by simply pulling it off. At this point, using the appropriate tool, unscrew the spark plug from the cylinder head.

Once you have completed this step, you can remove the spark plug from your Piaggio Vespa Primavera 125. To fit the new spark plug, simply follow these brief and simple steps in reverse, and you will have successfully completed the replacement.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to replace the rearview mirror on the Piaggio Vespa 125 Primavera?
How to replace the rearview mirror on the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To replace the rearview mirror on the Piaggio Vespa 125 Primavera, lift the rubber cap at the base of the mirror support: once this cap is lifted, gr…
How to Replace the Front Headlamp Bulb on the Piaggio Vespa 125 Primavera?
How to Replace the Front Headlamp Bulb on the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera In this tutorial, you will see how to replace the front headlamp bulb on the Piaggio Vespa 125 Primavera scooter, a very simple and quick operation. …
How do you replace the front shock absorber of the Piaggio Vespa 125 Primavera?
How do you replace the front shock absorber of the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To replace the front shock absorber of the Piaggio Vespa 125 Primavera, you need to loosen the screws that secure the component to its housing: this …

How to replace the exhaust on a BMW S 1000 RR?

To replace the exhaust on a BMW S 1000 RR, loosen the bolts that secure the silencer to its housing, located on the right side of the vehicle near the mudguard. Once the mounting bolts are loosened and the clamp connecting the exhaust to the collector has been widened, you can remove the old exhaust. The new one can then be inserted into its place, allowing you to secure it to the corresponding mounts and subsequently connect it to the collector; at this point, check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos