|
Do it yourself
| |||
| ||||
Model: Aprilia Sr 50
Here are the main steps to remove and replace the drive belt on the Aprilia SR 50 scooter. First, place your scooter on the central stand and start unscrewing the screws securing the transmission cover, located at the bottom left. Once the cover is removed, unscrew the central nut of the fan, as shown in the video. Next, unscrew the nut of the clutch bell, then remove the drive belt; replace it with the new one, ensuring it is inserted in the correct direction, and reassemble everything!
Updated on 2 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Sr 50
This guide outlines the steps to remove and replace the variator on the Aprilia SR 50 scooter, following the instructions below. First, place the cen…
Sr 50
To replace the transmission of the Aprilia SR 50, you need to loosen the screws that secure the cover located at the rear wheel, on the left side of …
Sr 50
In order to replace the transmission of the Aprilia SR 50, you need to loosen the screws that fix the casing to its housing, near the rear wheel on t…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
