Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Sx 125
Part: Engine

To disassemble the engine of the Aprilia SX 125, you need to loosen the screws that secure the engine block to its housing: this can then be freed from the connectors attached to it and from the intake and exhaust manifolds. At this point, it will be possible to loosen the screws that hold the cylinder in place, allowing you to access the piston inside it: the piston will need to be detached from the connecting rod, thus gaining access to the crankshaft. In this way, it will be possible to replace all the necessary components and then reassemble the engine block.

Posted on 29 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on the Aprilia SX 125
How to Replace the Engine Oil and Oil Filter on the Aprilia SX 125
Sx 125 These brief and simple steps will show you how to drain and replace the engine oil and oil filter while performing maintenance on the Aprilia SX 125.…
Engine Oil and Oil Filter Replacement for Aprilia Sx 125
Engine Oil and Oil Filter Replacement for Aprilia Sx 125
Sx 125 Follow the steps below to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia Sx 125. First, place th…
How to Replace the Engine Oil and Oil Filter on an Aprilia Sx 125
How to Replace the Engine Oil and Oil Filter on an Aprilia Sx 125
Sx 125 Here are the instructions for replacing the engine oil and oil filter on an Aprilia Sx 125 in simple and quick steps. First, drain the engine oil by …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos