|
Do it yourself
| |||
| ||||
|
Model: Aprilia Tuareg 660
You can replace the air filter on the Aprilia Tuareg 660 by loosening the screws that secure the panel located at the front of the bike, just below the handlebars: once these screws are removed, you can take off this panel to access the underlying filter. The filter can now be extracted so that you can place the new replacement part inside its housing; after replacement, cover the filter again with the panel and check that everything is functioning.
Posted on 6 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Tuareg 660
The replacement of the air filter on the Aprilia Tuareg 660 requires loosening the screws that hold the panel in the front of the vehicle, immediatel…
Tuareg 660
In order to replace the air filter of the Aprilia Tuareg 660, you need to loosen the screws that secure the panel located in the front of the motorcy…
Tuareg 660
The replacement of the air filter of the Aprilia Tuareg 660 can be done by loosening the screws that fix the panel located in the front of the vehicl…
|
How to Dismantle the Engine of the KTM EXC 300
To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |