Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement or Charging for Aprilia RSV1000

Model: Aprilia Rsv
Part: Battery

Video tutorial

In this guide, you will see how to charge or replace the battery of an Aprilia RSV 1000. First, remove the rider's seat by unscrewing two hex screws from underneath the rear corners of the seat. Now you have a complete view of the battery compartment.

On the top of the battery, there is a locking bracket; unscrew the 10mm bolt using a socket. Move the battery outward.

The technical data for charging is described on the top of the battery. If charging is unsuccessful, it must be replaced.

The recommended battery by the manufacturer is a YUASA YTX12-BS. First, remove the negative terminal, then the positive terminal. Reassemble everything as it was disassembled.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Aprilia RSV?
Rsv In this tutorial, you will see how to change the engine oil in the Aprilia RSV, a very simple and quick operation to perform every 12 months. First, …
How to replace the motor oil in the Aprilia RSV4?
How to replace the motor oil in the Aprilia RSV4?
Rsv In this tutorial we can see how to replace the engine oil in the Aprilia RSV4, an extremely simple and quick operation. First of all, we wait for the…
How to Replace the Front Brake Pads on an Aprilia RSV?
How to Replace the Front Brake Pads on an Aprilia RSV?
Rsv In this tutorial, you will see how to replace the front brake pads on an Aprilia RSV, a very simple and quick operation. First, open the cap of the b…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos