Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Brake Pads on an Aprilia RSV?

Model: Aprilia Rsv
Part: Brake pads

Video tutorial

In this tutorial, you will see how to replace the front brake pads on an Aprilia RSV, a very simple and quick operation. First, open the cap of the brake fluid reservoir, taking care to avoid any spills, then unscrew the mounting bolts from the caliper and separate it from the brake disc.

Next, remove the two clips indicated using pliers, extract both pins, and remove the old pads. Once all dirt residues are cleaned, you can insert the new parts and reassemble everything by following the reverse procedure.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Rsv In this tutorial, you will see how to change the engine oil in the Aprilia RSV, a very simple and quick operation to perform every 12 months. First, …
Rsv How to change the engine oil on an Aprilia Rsv? Follow this guide to proceed. Position the motorcycle on the original stand, unscrew the securing scr…
Rsv In this guide, you will see how to charge or replace the battery of an Aprilia RSV 1000. First, remove the rider's seat by unscrewing two hex screws …

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos