Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Aprilia RS 125

Model: Aprilia Rs 125
Part: Service warning light

Video tutorial

Briefly, follow these steps to reset the service light for the regular maintenance oil change on the Aprilia RS 125. First, place the bike on its stand and press the reset button located at the bottom left of the handlebars; then switch on the instrument panel, keeping the button pressed until the maintenance indicator resets, as shown in the video.

At this point, turn off the instrument panel and then start the engine, verifying that the service light has been correctly reset!


Posted on 24 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Starter Motor of the Aprilia RS 125
Rs 125 In this video tutorial, you will see how to disassemble and replace the starter motor of the Aprilia RS 125 motorcycle. First, place your motorcycle …
How to Replace the Spark Plug on an Aprilia RS 125
How to Replace the Spark Plug on an Aprilia RS 125
Rs 125 Before you begin, position your Aprilia RS 125 vertically. Start by removing the rider's seat using the key. Next, dismantle the fuel tank by unscrew…
How to Replace the Temperature Sensor on the Aprilia RS 125
How to Replace the Temperature Sensor on the Aprilia RS 125
Rs 125 Today, we will see, in this short and simple guide, the instructions on how to remove and replace the temperature sensor on the Aprilia RS 125 motorc…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos