Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rx125
Part: Engine oil

Descriptive guide for replacing the engine oil and oil filter of an Aprilia RX125 4-stroke. Obtain 1 litre of Castrol Power Racing SAE 5W40 for 4t, oil filter HIFLO HF563. Place a container for the used oil under the engine. Using a ratchet and a 24mm socket, unscrew the oil drain plug located under the crankcase on the left side. Allow all the oil to drain. Use the ratchet to unscrew the oil filter cover located under the crankcase on the right side. Replace the filter and re-screw the plug and cover. Open the oil filler cap located on the left side of the crankcase. Pour in the oil.

Updated on 11 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Engine Oil and Oil Filter Replacement for the Aprilia Atlantic 125
Engine Oil and Oil Filter Replacement for the Aprilia Atlantic 125
Atlantic 125 In this brief and simple guide, replace the engine oil and oil filter of the Aprilia Atlantic 125 scooter. First, place the scooter on its centre sta…
How to Replace the Engine Oil and Oil Filter on the Aprilia SX 125
How to Replace the Engine Oil and Oil Filter on the Aprilia SX 125
Sx 125 These brief and simple steps will show you how to drain and replace the engine oil and oil filter while performing maintenance on the Aprilia SX 125.…
How to Replace the Engine Oil and Oil Filter on an Aprilia Sx 125
How to Replace the Engine Oil and Oil Filter on an Aprilia Sx 125
Sx 125 Here are the instructions for replacing the engine oil and oil filter on an Aprilia Sx 125 in simple and quick steps. First, drain the engine oil by …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos