Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed the Clutch on the Aprilia Tuono

Model: Aprilia Tuono
Part: Clutch

Video tutorial

This guide shows how to bleed the clutch on the Aprilia Tuono motorcycle. The first step is to open the hydraulic clutch fluid reservoir and remove the old fluid with a syringe.

Next, insert a tubing for bleeding onto the designated fitting of the clutch cylinder, and using an 8 mm spanner, open the bleed valve and introduce new clutch fluid. During this process, continue to drain the old clutch fluid.

Once all the old fluid has been removed, keep filling the clutch fluid reservoir to the correct level. Test the clutch operation before taking to the road.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Aprilia Tuono?
How do you replace the exhaust pipe of the Aprilia Tuono?
Tuono The procedure for replacing the exhaust on the Aprilia Tuono can be carried out by loosening the fixing screws that secure the terminal to its housin…
How to Replace the Headlight Bulb on an Aprilia Tuono
How to Replace the Headlight Bulb on an Aprilia Tuono
Tuono Today's main steps will show you how to remove and replace the dipped beam bulb of the front headlight on an Aprilia Tuono motorcycle. First, place t…
How to Remove the Fuel Tank from an Aprilia Tuono?
How to Remove the Fuel Tank from an Aprilia Tuono?
Tuono To remove the fuel tank from an Aprilia Tuono, first remove the seat completely to access the screws securing the tank at the rear. Once these screws…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos