Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will illustrate the procedure for servicing the Aprilia Scarabeo 250 scooter by replacing the engine oil and oil filter. First, place your scooter on the centre stand and begin to unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then unscrew the oil filter cover to remove the small mesh filter, cleaning or replacing it as shown in the video. Finally, pour in the appropriate oil, filling to the level indicated in the user and maintenance manual!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on an Aprilia Scarabeo 250 GT
How to Replace the Rear Brake Pads on an Aprilia Scarabeo 250 GT
Scarabeo 250 Gt To replace the rear brake pads on an Aprilia Scarabeo 250 GT, remove the caliper for easier access to all components. First, unscrew the two bolts th…
Full Dip Colour Change on Aprilia Scarabeo
Full Dip Colour Change on Aprilia Scarabeo
Scarabeo 250 Gt Today, you will learn how to change the colour of your Scarabeo using removable full dip paint. Cover the headlight and front indicators, the Aprilia…

How to Replace the Spark Plug on the Sym CruiSym 300

In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions below. First, place your scooter on the centre stand and begin by removing the under-seat compartment to access the upper part of the engine. Then, disconnect the spark plug connector, using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and thread pitch, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos