Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handlebar Cover and Windscreen of the Aprilia Scarabeo 500

Model: Aprilia Scarabeo 500
Part:

Video tutorial

This guide explains how to remove and replace the plastic fairing of the handlebar and the windscreen of the Aprilia Scarabeo 500 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws of the central cover to remove it; then remove the small windscreen by unscrewing the additional screws, as shown in the video.

At this point, unscrew the screws of the handlebar fairing or instrument cluster, gently detaching it to remove; replace and install everything by applying the reverse procedure!


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Grips on the Aprilia Scarabeo 500?
How to Replace the Grips on the Aprilia Scarabeo 500?
Scarabeo 500 To replace the grips on the Aprilia Scarabeo 500, loosen the nuts located at the ends of the handlebars, corresponding to the weights: when these nut…
How to Replace the Belt on an Aprilia Scarabeo 500?
Scarabeo 500 To replace the belt on an Aprilia Scarabeo, loosen the bolts securing the cover at the rear wheel on the left side of the bike. Once the cover is rem…
How to Replace the Engine Oil and Oil Filter on the Aprilia Scarabeo 500
How to Replace the Engine Oil and Oil Filter on the Aprilia Scarabeo 500
Scarabeo 500 This guide outlines the steps to perform routine maintenance by replacing the engine oil and oil filter on the Aprilia Scarabeo 500 scooter. First, p…

How to Replace the Final Drive Oil of the Moto Guzzi Nevada 750

Today, we will go through the main steps for replacing the final drive oil of the Moto Guzzi Nevada 750. First, place the motorcycle on the centre stand and start unscrewing the final drive oil plug located under the transmission, allowing it to drain into a container for about ten minutes; then unscrew the filler cap to let the oil flow out more quickly. At this point, top up with the new transmission oil of the correct type (as indicated in the owner's manual), pouring the right amount of oil and finally securing the filler cap!

Watch the video!


by ScegliAuto

More videos