|
Do it yourself
| |||
| ||||
|
Model: Aprilia Scarabeo 500
This guide outlines the steps to perform routine maintenance by replacing the engine oil and oil filter on the Aprilia Scarabeo 500 scooter. First, place the scooter on its centre stand and begin to unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; clean or replace the small mesh oil filter. At this point, remove and replace the oil filter cartridge; unscrew the dipstick and top up with new oil!
Updated on 12 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Scarabeo 500
To replace the belt on an Aprilia Scarabeo, loosen the bolts securing the cover at the rear wheel on the left side of the bike. Once the cover is rem…
Scarabeo 500
To reset the Service light on the Aprilia Scarabeo 500, press and hold the MODE button located near the left handlebar of the bike: while holding the…
Scarabeo 500
This guide explains how to remove and replace the plastic fairing of the handlebar and the windscreen of the Aprilia Scarabeo 500 scooter. First, pla…
|
How to Remove the Front Wheel of a Vespa LX 125
To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a battery-powered screwdriver available. Next, completely turn off your Vespa LX 125 and preferably leave it in an elevated position. At this point, use your battery-powered screwdriver to remove all the screws on the rim. Once done, gently pull the front wheel towards you to fully detach it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
