Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To set the clock on the Aprilia Sportcity 125, turn the ignition key in the ignition switch to power on the instrument panel. Once the panel is on, press and hold the button located to the right of the handlebars until the hours start to flash. At this point, you can change the hours with single presses of the same button; after entering the correct hour, press and hold the same button again, noting that the minutes will flash and can be modified in the same manner.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Aprilia Sportcity 125?
How to Set the Clock on the Aprilia Sportcity 125?
Sportcity 125 To adjust the clock on the Aprilia Sportcity 125, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, pres…
How to replace the spark plug coil on the Aprilia Sportcity 125
How to replace the spark plug coil on the Aprilia Sportcity 125
Sportcity 125 In this guide, you will learn how to remove and replace the spark plug coil on the Aprilia Sportcity 125 scooter. First, place the scooter on the cen…
How to Replace or Clean the Air Filter of the Aprilia Sportcity 125
How to Replace or Clean the Air Filter of the Aprilia Sportcity 125
Sportcity 125 Below are the steps that will allow you to remove and replace (or clean) the air filter of the engine of the Aprilia Sportcity 125 scooter. First, pl…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos