Do it yourself
| ||||
|
Model: Aprilia Sportcity 125
In this guide, we will see how to disassemble and replace the spark plug coil of the Aprilia Sportcity 125 scooter. First of all, we put the scooter on the center stand and start by disconnecting the electrical connector or the spark plug wire; then we unscrew the fixing screw of the coil, disconnecting the two electrical connectors to remove it, as shown in the video. At this point, we proceed to install the new original coil, screwing the spark plug wire (removing it from the old one); then we connect the wire to the spark plug and check the ignition!
Posted on 23 November 2023 by ScegliAuto
|
How do you change the engine oil of the Beta Xtrainer 300?In order to replace the Beta Xtrainer 300 engine oil, you need to loosen the screws that secure the skid plate positioned in the lower part of the bike. Once it has been removed, it will be possible to access the components in the lower part, including the oil drain plug. This will have to be unscrewed in order to collect the used oil inside a suitably positioned container. It will also be possible to replace the oil filter and finally re-fit the skid plate. Finally, it will be possible to top up from the special vent on the right side of the bike. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |