Do it yourself
Frequently asked questions about cars and motorcycles

Model: Aprilia Sr 150
Part: Clock

To set the clock on the Aprilia SR 150, turn on the ignition by rotating the key in the ignition switch. Once the ignition is on, press and hold the V button located to the right of the instrument cluster until the hours start to flash. By repeatedly pressing the button, you will notice that the hours can be changed; then, press and hold the V button again until the minutes start to flash. You can now modify the minutes in the same way, and then switch off the ignition.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Sr 150 Before starting, position your Aprilia SR 150 on the centre stand. Begin by undoing and removing the central nut that secures the front wheel axle. T…
Sr 150 To replace the air filter on the Aprilia SR 150, loosen the bolts securing the cover near the rear wheel, just above the transmission. Once the cover…
Sr 150 You can replace the air filter on the Aprilia SR 150 by loosening the screws that secure the cover on the left side of the rear wheel, just above the…

How to Replace the Remote Battery on a Ducati Multistrada?

In this tutorial, you will learn how to replace the battery in the remote control of the Ducati Multistrada, a very simple and quick operation. You will need a replacement CR2032 battery and a small flathead screwdriver. First, grab the remote from the rear compartment, then push it down and unlock it. Next, remove the rubber cap using the screwdriver, take out the old battery, and insert the new one, ensuring the polarity is correct. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos