Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q3
    4. : Front bumper

Audi Q3 - Front bumper

Front Bumper Audi Q3 (2011-2018 / 8 u)

Audi Q3 (2011-2018 / 8U)
How to remove the front bumper of the Audi Q3.
In this guide, we will see the instructions that will allow us to disassemble and remove the front bumper of the Audi Q3. First, let's open the hood of the …Read all…
Posted on 24 December 2025 by ScegliAuto
Accelerator (1) Airbag (2) Roof rack bars (1) Battery (8) Transmission (1) Body (2) Key (20) Timing belt (9) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Throttle body (1) Differential (1) Electric cooling fan (1) Headlight (1) Tail light (5) Air filter (4) Cabin air filter (6) Oil filter (2) Accessory kit (1) Light bulb (1) Side marker bulb (1) Headlight bulb (3) Handle (3) Engine oil (1) Clock (2) Door trim panel (1) Front bumper (1) Rear bumper (2) Brake pads (2) Pump (2) Instrument cluster (3) Fuse box (29) Side mirror (2) AdBlue warning light (2) Warning light – error code (9) (26) Tire pressure warning light (6) Service warning light (34) Fuel cap (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos