Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Audi Q3.

Model: Audi Q3 8U - Years 2011-2018
Part: Front bumper

In this guide, we will see the instructions that will allow us to disassemble and remove the front bumper of the Audi Q3. First, let's open the hood of the vehicle and start unscrewing all the fastening screws located on the upper and lower parts of the bumper; then we unscrew the additional screws present on both sides of the front wheel wells, detaching the plastic side trims, as shown in the video. At this point, we gently detach the bumper from the sides until we completely remove it, replacing it with a new one if necessary; we then reassemble the front bumper by applying the reverse procedure.

Posted on 24 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper of the 2017 Audi Q3
How to disassemble the rear bumper of the 2017 Audi Q3
Audi Q3 (2011-2018 / 8U) If you want to find out how to remove the rear bumper of your first-generation Audi Q3 (2017) on your own and without the help of a professional, all…
How to remove the lower rear light of the Audi Q3
How to remove the lower rear light of the Audi Q3
Audi Q3 (2018-2025 / F3) In this video, we will see how to remove the rear taillight, integrated into the bumper, of the Audi Q3: using a plastic spatula, we open the panel l…
Removing and Installing the Front Headlight of the Audi Q3
Removing and Installing the Front Headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) In this video tutorial, discover how to remove and replace the front headlight of the Audi Q3, as well as the Q5. First, open the hood and disconnect…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos