Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q3
    4. : Rear bumper

Audi Q3 - Rear bumper

Rear Bumper Audi Q3 (2011-2018 / 8 u)

Audi Q3 (2011-2018 / 8U)
How to disassemble the rear bumper of the 2017 Audi Q3
If you want to find out how to remove the rear bumper of your first-generation Audi Q3 (2017) on your own and without the help of a professional, all you have …Read all…
Posted on 30 January 2025 by ScegliAuto
Audi Q3 (2011-2018 / 8U)
How to Replace the Rear Bumper on an Audi Q3?
To replace the rear bumper on an Audi Q3, first detach the trim pieces located around the rear wheel wells. Once these are removed, you can loosen the …Read all…
Posted on 5 September 2026 by ScegliAuto
Accelerator (1) Airbag (2) Roof rack bars (1) Battery (8) Transmission (1) Body (2) Key (20) Timing belt (9) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Throttle body (1) Differential (1) Electric cooling fan (1) Headlight (1) Tail light (5) Air filter (4) Cabin air filter (6) Oil filter (2) Accessory kit (1) Light bulb (1) Side marker bulb (1) Headlight bulb (3) Handle (3) Engine oil (1) Clock (2) Door trim panel (1) Front bumper (1) Rear bumper (2) Brake pads (2) Pump (2) Instrument cluster (3) Fuse box (29) Side mirror (2) AdBlue warning light (2) Warning light – error code (9) (26) Tire pressure warning light (6) Service warning light (34) Fuel cap (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos